What can you do to unblock a Blocked Drain
Perhaps you've heard a flat-head screwdriver can remove a cover from a toilet. Additionally, it is possible to wrap a rope around the cover of your toilet to give yourself better leverage when using drain rod. If you're able to locate the blockage to the drain by yourself then it makes the use of the drain rod much easier. This can also save you the cost of calling an experienced plumber out and fix your plumbing.
Vinegar and baking soda
Baking soda, vinegar and baking soda may be used together to unblock any obstructions in the drain. When they are mixed the two ingredients create an airy mix that bubbles. These gases are strong enough to loosen the clog and let the water move freely. But, they're not strong enough to clean a complete plumbing. Since drains aren't closed systems so the pressure produced by these two components won't suffice to eliminate the obstruction.
Make sure your sink doesn't have excessive baking soda or vinegar prior to when you start using them for clearing the drain of blockage. In the event of using them, you must use an measuring cup to add the contents into the drain. Use a funnel or measuring cups to cover the drain in case the dimensions of the vessel is too tiny. Repeat the process for as many times as you'll need to get rid of the obstruction.
Wire coat hanger
A coat hanger wire to clear the drain with a clog that has become extremely severe without the use of harsh chemical solutions or to remove the clog out of your drainpipe. Though the coat hanger could remove the drain and clear it, the snake will require to be placed inside the drain. To use this method, unwind the hanger using pulling it off the hook with the pliers. To prevent the wire from getting caught in your drainpipe, it is recommended to be sure to straighten it.
Similar principles can be applied to toilet drains. Wire coat hangers can be untwisted and become straight wire. It can be wrapped in a rag or secure with duct tape. The blockage can be pushed through the drain bend with the wire. Before using this method, it's essential to put on rubber gloves and flush the drain with water. It should be possible for the water to move freely through the drain to remove the blockage.
Salt and boiling water
If you're suffering from obstructions in drains one of the most effective ways to eliminate it is by mixing a cup of baking soda with one cup salt. The mixture should be left for at minimum an half an hour. Following that, apply warm water for flushing out the mixture. Repeat if necessary. Another option is to make use of a wire coat hooker. There is a plumbing beneath the kitchen sink in case it is partially blocked.
Boil a pot of water in a pan and add the water to the drain. Don't overfill the drain. It could take several attempts to clear the drain. After you have poured the entire amount of water down the drain, you could add up to half a teaspoon of salt from table.
Dish detergent
The use of liquid dishwashing detergent is the ideal method of clearing an obstruction in drains because it dissolves grease and fat. You can use it for as many times as you need. It is important to get rid of the standing water prior to using dishwashing detergent. If you discover that the water isn't enough to pour down the drain, you'll have to employ a plunger or drain snake for clearing the obstruction.
Dish soap can reduce fat and grease that block drains, making it a viable and economical solution. To remove any gunky or accumulation of ice from your pipes, you can use hot water. You can also employ rubber gloves to help you remove the clog. If you are unable to remove the blockage, you can also use baking soda or white vinegar.